 |
|
|
|
|
| |
| Cylinder
Mowers |
|
This
superb light weight sports ground mower is not only
perfect for soccer pitches, cricket ground where compaction is
a problem, but also for large areas of formal
lawns, where the collection of grass and a beautiful
striped effect are required. An optional trailing
seat can be used to increase efficiency on larger
areas. |
|
|
ALLETT
(UK) BUFFALO 34 |
|
|
| |
The
Buffalo is a very compact, well balanced
machine and is highly manoeuvrable
in confined areas. The mower has a
low profile for good forward visibility.
Despite its light weight, the Buffalo
34 is very robust and both long life
and easy servicing are assured.
The
rear roller is in three sections and
is rubber covered for good traction
and silent running over hard surfaces.
Internally, the rear roller is fitted
with hardened steel differential gears,
which run in a sealed oil bath. The
optional trailing seat also has a
rubber covered roller. |
|
| |
In
common with all other Allett mowers,
height and cutter adjustments are very
easy on the Buffalo 34. Designed to
run on low engine revs., the machine
is very smooth, quiet and economical
to operate. The
large diameter cutting cylinder gives
the machine the ability to cut long
grass, even in wet conditions, which
leave other mowers in the shed!
|
|
| |
|
|
|
| |
|
|
|
| |
Cutting
Width |
863.6mm
(34") |
Overall
Width |
1041mm
(41") |
Weight |
175kg
(385lb) |
Engine |
Briggs
and Stratton |
Overall
Height |
1010mm
(40") |
Overall
Length |
1280mm
(50") |
Rate
of Cut |
66
cuts per metre (60 cuts per
yard / 1.66 cuts per inch) |
Height
of Cut |
10mm
to 40mm (3/8 to1.5") |
| Drive
Clutch |
Handle
mounted lever operating tight
& loose V belt via a cable |
|
| |
| Cutter
Clutch |
Handle
mounted lever operating tight
& loose triple V belts via
a cable
|
Rear
Roller |
Three
piece steel sections, rubber
covered |
Differential |
Hardened
steel gears running in a sealed
oil bath |
Front
Roller |
Aluminium
running on sealed bearings |
Cylinder |
6
bladed, all welded, high carbon
spring steel, hardened and tempered
to 45HRC Mounted on greaseable
bearings |
Bottom
Blade |
Manufactured
from ENS hardened and tempered
to 45HRC |
Handle
Bar |
Adjustable
with anti-vibration mountings |
Grassbox |
Rotationally
moulded plastic with steel reinforcing
strip |
| Optional
Extras |
Trailing
seat
|
|
| |
|
|
|
|
|
|
 |
|
|
